S UPER S ERVER 8060 Manual enters the power-conserving state specified in the Hard Disk Power Down Mode option. The options are Disabled and 1 Min through 14 Min in 1 minute increments. Suspend Time Out When in the AMP mode, this option specifies the length of a period of system inactivity while in the suspend state. When this length of time expires, the computer enters a suspend power. The options are Disabled and 1 Min through 14 Min in 1 minute increments. The default setting is 5 . Power Button Enable When in the AMP mode, this in the AMP mode, this option specifies how the power button mounted externally on the computer chassis is used. The options are: Suspend, PowerOn and PowerOff .
When set to PowerOn or PowerOff, pushing the power button turns the computer on or off. The Suspend setting places the computer in Suspend mode or Full On power mode. The BIOS has the capability to detect the IRQ events. When the BIOS detects an IRQ trigger event being activated, then, the system will "wake up" and resumes its activities. IRQ1 The options are: Ignore and Monitor . IRQ3 The options are: Ignore and Monitor. IRQ4 The options are: Ignore and Monitor. IRQ5 The options are: Ignore and Monitor. IRQ6 The options are: Ignore and Monitor. IRQ7 The options are: Ignore and Monitor. IRQ9 The options are: Ignore and Monitor. 7-12