Chapter 7: BIOS/Setup IRQ10 The options are: Ignore and Monitor. IRQ11 The options are: Ignore and Monitor. IRQ12 The options are: Ignore and Monitor. IRQ14 The options are: Ignore and Monitor. IRQ15 The options are: Ignore and Monitor. USB Resume When in the AMP mode, this setting allows you to wake up the system from a USB device. The options for this setting are Enabled and Disabled . PME Resume When in the AMP mode, this option allows you to wake up the system from a PME device. The options for this setting are Enabled and Dis- abled . R1 Resume When in the AMP mode, this option allows you to wake up the system from a R1 device. The options for this setting are Enabled and Dis- abled .
PCI/Plug and Play Setup Plug and Play-Aware OS The options for this setting are No and Yes. Set this option to Yes to allow the operating system to detect ISA Plug and Play devices. (Since the S2QR6 has no ISA slots, this should always be set to No .) PCI Latency Timer (PCI Clocks) This setting specifies the latency timings in PCI clocks for all PCI devices. The options are 32, 64 , 96, 128, 160, 192, 224, and 248. 7-13