Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

S UPER S ERVER 8060 Manual IRQ10 IRQ11 IRQ14 IRQ15 These settings specify which bus the specified IRQ line is used on and allow you to reserve IRQs for legacy ISA adapter cards. If more IRQs must be removed from the pool, the end user can use these options to reserve the IRQ by assigning an ISA/EISA setting to it. Onboard I/O is configured by AMIBIOS. All IRQs used by onboard I/O are configured as PCI/PnP. IRQ14 and 15 will not be available if the onboard PCI IDE is enabled. If all IRQs are set to ISA/EISA and IRQ14 and 15 are allocated to the onboard PCI IDE, IRQ 9 will still be available for PCI and PnP devices. This is because at least one IRQ must be available for PCI and PnP devices.

The options are PCI/PnP and ISA/EISA. (See page 3-5 for information on shared IRQs.) Reserved Memory Size This setting specifies the size of the memory area reserved for legacy ISA adapter cards. The options are Disabled , 16K, 32K and 64K. Reserved Memory Address This setting specifies the beginning address (in hex) of the reserved memory area. The specified ROM memory area is reserved for use by legacy ISA adapter cards. The options are C0000, C4000, C8000 , CC000, D0000, D4000, D8000 and DC000. Peripheral Setup Onboard SCSI This setting enables or disables the onboard SCSI. The options are Enabled and Disabled. CPU1 Current Temperature The current temperature of CPU1 is displayed here.

CPU2 Current Temperature The current temperature of CPU2 is displayed here. CPU3 Current Temperature The current temperature of CPU3 is displayed here. 7-16