Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

Chapter 7: BIOS/Setup CPU4 Current Temperature The current temperature of CPU2 is displayed here. System Overheat Warning The options for this setting are Enabled and Disabled . When set to Enabled the user is given the opportunity to set the overheat warning temperature. Overheat Warning Temperature Use this setting to set the CPU overheat warning temperature. The options are 25 °C through 75 °C in 1 °C intervals. Note: The Optimal and Fail-Safe default settings are 55 °C .

H/W Monitor CPU1 H/W Monitor CPU2 H/W Monitor CPU3 H/W Monitor CPU4 H/W Monitor (+3.3V) H/W H/WMonitor (+5V) H/W Monitor (+12V) H/W Monitor (+2.5V) CPU1 Fan CPU2 Fan CPU3 Fan CPU4 Fan The above features are for PC Health Monitoring. The motherboards with W83781D have seven onboard voltage monitors for the CPU core, CPU I/ O, +3.3V, +5V, -5V, +12V, and-12V, and for the four-fan status monitor. OnBoard FDC This setting enables the FDC (Floppy Drive Controller) on the motherboard. The options are Disabled and Enabled . OnBoard Serial Port1 This setting specifies the base I/O port address of serial port 1. The options are Disabled, 3F8h , 2F8h, 3E8h and 2E8h.

OnBoard Serial Port2 This setting specifies the base I/O port address of serial port 2. The options are Disabled, 3F8h, 2F8h , 3E8h and 2E8h. 7-17