Chapter 3 E100-9APP I/O Introduction Chapter 3 E100-9APP I/O Introduction This section describes the E100-9AP I/O connectors and pin definition. Please review the Safety Precautions in Appendix A before installing or removing components. Illustrations showing front and rear I/O layouts and a motherboard layout indicating component locations and I/O port locations may be found in Chapter 1. Please review the Safety Precautions in Appendix A before installing or removing components. 3.1 Front I/O LAN Ports Two LAN ports (LAN1 ~ LAN2) are located on the I/O back panel. These ports accept RJ45 type cables. Please refer to the LED Indicator section for LAN LED information.
See the table below for pin defintions. 21 LAN Port0 Pin Definitions Pin# Definition A1 TD1+ Pin# Definition A11 YEL- A2 TD1- A12 YEL+ A3 TD2+ A13 GRN-/ORG+ A4 TD2- A14 GRN+/ORG- A5 CT VCC _ A15 A6 CT VCC _ A16 A7 TD3+ A17 A8 TD3- A18 A9 TD4+ A19 A10 TD4- A20