SuperServer E100-9APP User's Manual USB 2.0 Ports Four rear panel I/O USB ports are located above the COM ports. See the table below for pin definitions. Audio Connectors The rear I/O panel has two ports for audio connectors. The Line_out audio jack connector is for stereo speakers, earphone or front surround sound speakers. The Mic_in audio jack connector is for a microphone. 3.3 Internal Expansion Slots M.2 Slot M.2 is formerly known as Next Generation Form Factor (NGFF) and is located at JMD1 on the bottom side of the motherboard. The M.2 slot is designed for internal mounting devices.
The A2SAN-H/-L/-E/X11SAN motherboard deploys a B-KEY for SATA/PCIe SSD devices or USB/PCIe WWAN or GNSS card. The A2SAN-H/-L/-E/X11SAN deploys a 2280 screw hole location for a 2280 M.2 module. 2242 and 3042 M.2 modules are supported by an extender bracket to fit on the 2280 screw hole location. 24 RS-485 D-SUB Connector Pin Definitions Pin# Definition Pin# Definition 1 DATA- 2 DATA+ 3 N/A 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A Rear Panel USB 2.0 Ports Pin Definitions Pin# Definition 1 VCC 3 USB Data- 3 USB Data+ 4 Ground