Supermicro SuperServer E100-9APP — Supermicro SuperServer E100-9APP User's Manual PDF (Revision 1.0a)

Chapter 5: BIOS Onboard LAN3 Option ROM Use this option to select the type of device installed in LAN Port 3 used for system boot. The options are Disabled and PXE. Onboard LAN4 Option ROM Use this option to select the type of device installed in LAN Port 4 used for system boot. The options are Disabled and PXE. Onboard Video Option ROM Use this item to select the Onboard Video Option ROM type. The options are Disabled, Legacy, and EFI. VGA Priority This feature allows the user to select the graphics adapter to be used as the primary boot device. The options are Onboard and Offboard.

Network Stack Use this feature to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Disabled and Enabled. *If the item above set to Enabled, the four items below will appear: IPv4 PXE Support Use this feature to enable IPv4 PXE boot support. The options are Enabled and Disabled. IPv6 PXE Support Use this feature to enable IPv6 PXE boot support. The options are Enabled and Disabled. PXE boot wait time Use this option to specify the number of times media will be checked. Press "+" or "-" on your keyboard to change the value. The default setting is 0 .

Media detect count Use this option to specify the number of times media will be checked. Press "+" or "-" on your keyboard to change the value. The default setting is 1 . Super IO Configuration Super IO Chip AST2400 Serial Port 1 Configuration This submenu allows the user the configure settings of Serial Port 1. Serial Port Select Enabled to enable the selected onboard serial port. The options are Enabled and Disabled. 45