Supermicro SuperServer E100-9APP — Supermicro SuperServer E100-9APP User's Manual PDF (Revision 1.0a)

SuperServer E100-9APP User's Manual Maximum Payload Use this feature to select the setting for the PCI Express maximum payload size. The options are Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes. Relaxed Ordering Select Enable to enable Relaxed Ordering support which will allow certain transactions to violate the strict-ordering rules of PCI bus for a transaction to be completed prior to other transactions that have already been enqueued. The options are Enabled and Disabled . Extended Tag Use this item to allow a device to use the 8-bit tag field as a requester. The options are Disabled and Enabled.

ARI Forwarding When this feature is enabled, the Downstream Port disables its traditional device number to 0 when turning Type1 Configuration Request into a Type0 Configuration Request. The default value is Disabled . M.2 PCI-E 3.0 X4 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot. The options are Disabled, Legacy , and EFI. SLOT 7 PCI-E 3.0 X16 Bifurcation Use this feature to set the PCI-E slot to operate as a single x16 slot or to bifurcate into two x8 slots. A proper riser card must be used to take advantage of bifurcation. The options are x8x8 and x16 .

SLOT 7 PCI-E 3.0 X16 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot. The options are Disabled, Legacy , and EFI. Onboard LAN Option ROM Type Use this option to enable Option ROM support to boot the computer using a network device specified by the user. The options are Legacy and EFI. Onboard LAN1 Option ROM Use this option to select the type of device installed in LAN Port 1 used for system boot. The options are Disabled, PXE , and iSCSI. Onboard LAN2 Option ROM Use this option to select the type of device installed in LAN Port 2 used for system boot. The options are Disabled and PXE. 44