Supermicro SuperServer E100-9APP — Supermicro SuperServer E100-9APP User's Manual PDF (Revision 1.0a)

Chapter 5: BIOS Port 0 - Port 5 SATA Device Type (Available when a SATA port is detected) Use this item to specify if the connected SATA device is a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. Server ME (Management Engine) Configuration This feature displays the following system ME configuration settings. General ME Configuration Operational Firmware Version ME Firmware Type Recovery Firmware Version ME Firmware Features ME Firmware Status #1 ME Firmware Status #2 Current State Error Code PCIe/PCI/PnP Configuration The following information will display: PCI Bus Driver Version PCI Devices Common Settings:

PCI PERR/SERR Support Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI Bus Signal Error Event. The options are Enabled and Disabled . Above 4 G Decoding (Available if the system supports 64-bit PCI decoding) Select Enabled to decode a PCI device that supports 64-bit in the space above 4 G Address. The options are Enabled and Disabled . SR-IOV (Available if the system supports Single-Root Virtualization) Select Enabled for Single-Root IO Virtualization support. The options are Enabled and Disabled. * Onboard 10GbE LAN SR-IOV not supported on D-1540/D-1520. 43