Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual 2.3 Motherboard Components Processor The E200-9AP features an embedded Intel Atom E3940 Quad Core SoC processor. Memory Support The motherboard supports up to 8 GB of DDR3L Dual Non-ECC SO-DIMM of speeds up to 1866 MHz in one low-profile slot. Check the Supermicro website for a list of memory modules that have been validated. Installing Memory Insert a SO-DIMM into the memory slot. Caution: Exercise extreme care when installing or removing DIMM modules to prevent damage. Installing a SO-DIMM Module into a Horizontal Socket 1. Align the receptive point on the bottom of the SO-DIMM module against the key on the memory socket.

Note the notches on the side of the SO-DIMM module and those on the socket to avoid causing damage. SO-DIMM Memory Module Receptive Point on the Module Socket Key Memory Module Socket 2. Line up the bottom of the SO-DIMM memory module with the edge of the horizontal socket. 3. Once they are lined up, push the memory module into the memory socket until the module is securely seated in the socket. 18