Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual 4-pin 12V Power Connector JPV1 is the 12V DC power connector that provides an alternative single power source for special enclosure when the 24-pin ATX power is not in use. 3 1 4 JPV1 Pin Layout 2 Required Connection Note 1: The 12V DC input is limited to 12A by design. It provides up to 144W power input to the motherboard. Please keep onboard power use within the power limits specified above. Over-current DC power use may cause damage to the motherboard. Note 2: Do not use the 4-pin DC power at JPW2 when the 24-pin ATX Power at JPW1 is connected to the power supply. Do not plug in both JPW1 and JPW2 at the same time..

4-pin Connector for HDD This 4-pin power connector at JPH1 provides power from the motherboard to internal SATA hard drive or SSD device. 1 4 JPH1 Pin Layout 24 +12V 4-pin Power Pin Definitions Pin# Definition 1 - 2 Ground 3 - 4 +12V Pin Definitions Pin# Definition 1 12V 2 GND 3 GND 4 5V