Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual TPM Header The JTPM1 header is used to connect a Trusted Platform Module (TPM), which is available from a third-party vendor. A TPM is a security device that supports encryption and authentication in hard drives. It enables the motherboard to deny access if the TPM associated with the hard drive is not installed in the system. See the table below for pin definitions. 19 1 20 JTPM1 Pin Layout 2 GPIO Headers The JGP1 (General Purpose Input/Output) header is located near the SATA connectors on the motherboard. The JGP1 header is a general-purpose I/O expander on a pin header from Intel SoC. 2 10 9 1 GPIO Header Pin Layout Note:

The "I2C#_SCL/SDA" are pin names of Intel N3700 SoC GPIO. 28 Trusted Platform Module Header Pin Definitions Pin# Definition Pin# Definition 1 LCLK 2 GND 3 LFRAME# 4 No Pin 5 LRESET# 6 +5V (X) 7 LAD3 8 LAD2 9 3.3V 10 LAD1 11 LAD0 12 GND 13 SMB CLK4 (X) _ 14 SMB DAT4 (X) _ 15 P3V3 STBY _ 16 SERIRQ 17 GND 18 GND 19 P3V3 STBY _ 20 LDRQ# (X) GPIO Memory Address Table Pin Definitions Pin# SoC GPIO # Memory Address 1 Power 2 Ground 3 GP0 0xD0C70578 4 GP4 0xD0C70558 5 GP1 0xD0C70570 6 GP5 0xD0C70550 7 GP2 0xD0C70568 8 GP6 0xD0C70548 9 GP3 0xD0C70560 10 GP7 0xD0C70540