Chapter 3: Motherboard Connections External Speaker The JD1 header is for the external speaker. If you wish to use an external speaker, connect its cable to pins 1-4. Disk-On-Module Power Connector The Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid-state DOM storage device connected to one of the SATA ports. 1 2 3 DOM Power Pin Layout Standby Power The Standby Power header is located at JSTBY1 on the motherboard. Audio Front Panel Header A 10-pin audio header located on the motherboard allows you to use the onboard sound chip (ALC888S) for audio function. Connect an audio cable to the this header to use this feature.
27 External Speaker Connector Pin Definitions Pin Setting Definition Pins 1-4 Speaker DOM Power Pin Definitions Pin# Definition 1 5V 2 Ground 3 Ground Standby Power Pin Definitions Pin# Definition 1 +5V Standby 2 Ground 3 No Connection Audio Header Pin Definitions Pin# Definition Pin# Definition 1 Microphone Left _ 2 Audio Ground _ 3 Microphone Right _ 4 Audio Detect _ 5 Line 2 Right _ _ 6 Ground 7 Jack Detect _ 8 Key 9 Line 2 Left _ _ 10 Ground