Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual HDD LED/UID Switch The HDD LED Switch connection is located on pins 13 and 14 of JF1. Attach a cable to Pin 14 to show hard drive activity status. Power LED The Power LED connection is located on pins 15 and 16 of JF1. Fan Headers There are two 4-pin fan headers on the motherboard (FAN1, FAN2). Although pins 1-3 of the fan headers are backward compatible with the traditional 3-pin fans, we recommend you use 4-pin fans to take advantage of the fan speed control via Pulse Width Modulation through the BMC. This allows the fan speeds to be automatically adjusted based on the motherboard temperature.

26 HDD LED Pin Definitions (JF1) Pin# Definition 13 3.3V Standby 14 HDD Active Power LED Pin Definitions (JF1) Pin# Definition 15 3.3V 16 Power LED Fan Header Pin Definitions Pin# Definition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control