Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

Chapter 5: BIOS system configuration. Select Disabled to disable ASPM support. The options are Disable, L0s, L1, L0sL1, and Auto . PCIe Speed Uses this feature to select the PCI speed for the device installed in slot 1. The options are Auto , Gen1, and Gen2. M.2 ASPM Use this item to set the Active State Power Management (ASPM) level for a PCI-E de­ vice. Select Auto for the system BIOS to automatically set the ASPM level based on the system configuration. Select Disabled to disable ASPM support. The options are Disable, L0s, L1, L0sL1, and Auto . PCIe Speed Use this feature to select the PCI speed for the device installed in the M.2 slot. The op­ tions are Auto , Gen1, and Gen2.

USB Configuration USB3.0 Support Select Enable for USB 3.0 support. The options are Enable and Disable. XHCI Pre-Boot Driver Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a pre-boot drive specified by the user. The options are Enabled and Disabled . XHCI Hand-Off This is a work-around solution for operating systems that do not support XHCI (Extensible Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the XHCI driver. The settings are Enabled and Disabled. USB Mass Storage Driver Support Select Enabled for USB mass storage device support. The options are Disabled and Enabled .

SATA Configuration Chipset SATA This item enables or disables the onboard SATA controller supported by the SoC. The options are Enable and Disable. 45