SuperServer E200-9B User's Manual 3.3 Ports 5 9 11 2 7 1 4 6 8 10 12 3 Figure 3-1. Rear input/Output Ports # 1. 2. 3 4 5 6 HDMI and DP Ports One HDMI and one DisplayPort are located next to the IPMI_LAN port on the I/O backpanel. These ports are used to display both high definition video and digital sound through an HDMI or DP-capable display, using a single HDMI or DP cable (not included). The X11SBA supports HDMI Specification version 1.4b and DP 1.1a via N3700 processor graphics controller. LAN Ports Four LAN ports (LAN1 ~ LAN4) are located on the I/O back panel. There is also a dedicated IPMI LAN port on the I/O back panel. These ports accept RJ45 type cables. .
Universal Serial Bus (USB) Ports There are two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB2/3) located on the I/O back panel. The motherboard also has two USB 2.0 headers for four (4) USB 2.0 ports (USB5/6 and USB7/8). The USB4 is one (1) USB 2.0 port in a Type A connector. The onboard headers can be used to provide front side USB access with a cable (not included). Serial Ports There are two COM headers (COM1 and COM2) on the motherboard. 28 Rear I/O Ports Description # Description HDMI 7 USB3 (3.0) DisplayPort 8 LAN1 USB0 9 LAN3 USB1 10 LAN2 IPMI LAN _ 11 LAN4 USB2 (3.0) 12 VGA Port