Chapter 3 Motherboard Connections Chassis Intrusion A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable from the chassis to the header to inform you when the chassis is opened. 4-pin Connector for HDD This 4-pin power connector at JSATA1 provides power from the motherboard to internal SATA hard drive or SSD device. Refer to the table below for pin definitions. 1 4 JSATA1 Pin Layout SATA Ports The X11SBA-LN4F/F has two SATA 3.0 ports that are supported by the Intel SoC. I-SATA1 supports SuperDOM. Mini PCI-E Slot The Mini PCI-E slot is used to install a compatible Mini PCI-E device. Refer to the table below for pin definitions.
The mSATA feature leverages the speed and reliability of the SATA interface to provide a high performance, cost-effective storage solution for smaller devices like notebooks and netbooks. The specification maps SATA signals onto an existing small form factor connector, enabling more compact integration in a wide variety of applications for both hard disk (HDD) and solid state drives (SSDs). The mSATA connector allows you to increase the storage offerings of without compromising valuable space. The mSATA feature is mux with I-SATA0. 27 Chassis Intrusion Pin Definitions Pins Definition 1 Intrusion Input 2 Ground Pin Definitions Pin# Definition 1 12V 2 GND 3 GND 4 5V