Chapter 3 Motherboard Connections Audio Enable JPAC1 allows you to enable or disable the onboard audio support. The default position is on pins 1 and 2 to enalbe onboard audion connections. See the table below for jumper settings. 3.5 LED Indicators LAN1 ~ LAN4 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each port, one LED indicates activity when flashing while the other LED may be green, amber or off to indicate the speed of the connection. IPMI-Dedicated LAN LEDs A dedicated IPMI LAN is also included on the motherboard. The amber LED on the right of the IPMI LAN port indicates activity, while the green LED on the left indicates the speed of the connection.
See the table below for more information. IPMI LAN Activity LED Link LED 31 Audio Enable/Disable Jumper Settings Jumper Setting Definition Pins 1-2 Enabled Pins 2-3 Disabled LAN1/2 LEDs (Connection Speed Indicator) LED Color Definition Off 10 Mb/s Green 100 Mb/s Amber 1 Gb/s IPMI LAN LEDs Color Status Definition Off Off No Connection Green: Solid Link/Speed (Left) 100 Mb/s Amber Blinking Activity (Right) Active