SuperServer E200-9B User's Manual Spread Spectrum Clock If this feature is set to Enabled, the BIOS will monitor the level of electromagnetic interference caused by the components and will attempt to reduce the interference whenever needed. The options are Enabled and Disabled . Graphics Power Management Control RC6 (Render Standby) Select Enabled to enable render standby support.The options are Disabled and Enabled . Memory Configuration Options MRC Fast Boot Use this feature to enable or disable fast boot through the memory reference code (MRC). The options are Enabled and Disabled. Scrambler Select Enabled to enable memory scrambler support. The options are Enabled and Disabled.
RH Prevention Select Enabled to prevent Row Hammer attacks by increasing the average time between sending REF commands to DRAM. The options are Enabled and Disabled. Max TOLUD (Top of Low Usable DRAM) This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and TSEG, respectively, if these devices are enabled. The options are 2GB and 3GB. South Bridge The following South Bridge information will be displayed: Azalia Configuration Audio Configuration Audio Controller Select Enabled to enable the Azalia Audio Controller. The settings are Enabled and Disabled.
Azalia VCi Enable Select Enabled to enable the Virtual Channel 1 of the Azalia Audio Controller. The settings are Enabled and Disabled. 44