Supermicro SuperServer E200-9B — Supermicro SuperServer E200-9B User & Service Manual PDF

Chapter 5 BIOS USB Configuration XHCI Mode Select Enabled to support the operation mode for the XHCI (Extensible Host Controller Interface) controller. The options are Enabled and Disabled. USB2 PHY Power Gating Use this feature to configure the power consumption for the USB 2.0 physical layer (PHY). The options are Disabled, Enabled, and Auto . PCI Express Configuration PCI Express Configuration CPU SLOT1 PCIE 2.0 x1 (IN X8) PCI Express Port 1 This item enables or disables the PCI Express Port 0 on the motherboard. The options are Enabled and Disabled. ASPM Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.

Select Auto for the system BIOS to automatically set the ASPM level based on the system configuration. Select Disabled to disable ASPM support. The options are Disabled, L0s, L1, L0sL1, and Auto . PCIe Speed This feature allows the user to set the PCIe port speed. The options are Auto , Gen 2, and Gen 1. Detect Non-Compliance Device Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant with the PCI-E standards. The options are Enabled and Disabled . L1 Substates Use this feature to configure the PCI Express L1 Substates. The options are Disabled, L1.1, L1.2, and L1.1 & L1.2 .

Non-Common Clock With SSC Enabled Use this feature to configure the non-common clocking signal for Spread Spectrum Clocking (SSC). The options are Disabled and Enabled. Tx Eq Deemphasis Selection Use this feature to select the level of de-emphasis for an Upstream component. The options are 3.5dB and 6dB. 45