Chapter 3 Motherboard Connections Disk-On-Module Power Connector The Disk-On-Module (DOM) power connectors (JSD1 and JSD2) provide 5V power to a solid state DOM storage device connected to one of the SATA ports. 1 2 3 DOM Power Pin Layout TPM Header The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which is available from a third-party vendor. TPM is a security device that supports encryption and authentication in hard drives. It enables the motherboard to deny access if the TPM associated with the hard drive is not installed in the system.
19 1 20 JTPM1 Pin Layout 2 Overheat/Fan-Fail LED Header The JOH1 header is used to connect an LED indicator to provide warnings of chassis overheating 29 DOM Power Pin Definitions Pin# Definition 1 5V 2 Ground 3 Ground Trusted Platform Module Header Pin Definitions Pin# Definition Pin# Definition 1 LCLK 2 GND 3 LFRAME# 4 No Pin 5 LRESET# 6 +5V (X) 7 LAD3 8 LAD2 9 3.3V 10 LAD1 11 LAD0 12 GND 13 NC 14 NC 15 +3V DUAL _ 16 SERIRQ 17 GND 18 GND 19 P3V3 STBY _ 20 NC Overheat LED Pin Definitions Pin # Definition 1 3.3V 2 OH Active OH/Fan Fail LED Status Definitions State Message Off Normal Solid Overheat