Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual Standby Power The Standby Power header is located at JSTBY1 on the motherboard. Speaker On the JD1 header, pins 1-3 can be used for the power LED while pins 4-7 can be used for an external speaker. SGPIO The Serial Link General Purpose Input/Output (SGPIO) header is used to communicate with the enclosure management chip in the system. General Purpose I/O Header The JGP1 header is a general purpose I/O on a pin header.

30 Standby Power Pin Definitions Pin# Definition 1 +5V Standby 2 Ground 3 No Connection Speaker Connector Pin Definitions Pin# Definition 1-3 Power LED 4-7 Speaker Serial Link General Purpose Headers Pin Definitions Pin# Definition Pin Definition 1 NC 2 NC 3 Ground 4 DATA Out 5 Load 6 Ground 7 Clock 10 NC GPIO Expander Pin Definitions Pin# Definition Pin Definition 1 P3V3 2 GND 3 GP0 4 GP1 5 GP2 6 GP3 7 GP5 8 GP5 9 GP6 10 GP7