Chapter 3 Motherboard Connections Power Fail LED The Power Fail LED connection is located on pins 5 and 6 of JF1. Overheat (OH)/Fan Fail Connect an LED cable to pins 7 and 8 of JF1 (Front Control Panel) to use the Overheat/Fan Fail and UID LED connections. The blue LED on pin 7 works as the front panel UID LED indicator. The red LED on pin 8 provides warnings of overheating, fan failure or power failure. The red LED takes precedence over the blue LED by default. NIC1/NIC2 (LAN1/LAN2) The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins 11 and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10.
Attach the NIC LED cables here to display network activity. 33 Power Fail LED Pin Definitions (JF1) Pin# Definition 5 3.3V 6 PWR Supply Fail Overheat/Fan Fail and UID LED Pin Definitions (JF1) Pin# Definition 7 Blue LED 8 OH/Fan Fail Pin 8 Indicator Status Status Definition Off Normal On Overheat Flashing Fan fail LAN1/LAN2 LED Pin Definitions (JF1) Pin# Definition 9 NIC2 Activity LED 10 NIC2 Link LED 11 NIC1 Activity LED 12 NIC1 Link LED