Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual Main Power LED A Main Power LED is located at LED3 on the motherboard. When this LED is on, the system power is on. BMC Heartbeat LED LEDM1 is the BMC heartbeat LED. When the LED is blinking green, BMC is functioning normally. Overheat/PWR Fail/Fan Fail LED An onboard Overheat/PWR Fail/Fan Fail LED is located at LED8. Unit Identifier LEDs UID Indicators provide easy identification of a system that may be in need of service. The UID switch is located next to the VGA port on the back panel. The rear UID LED (LED7) is located next to the UID Switch; the front UID LED is on the control panel.

When you press the UID switch, both rear UID LED and front panel UID LED Indicators are toggled on or off. UID can also be triggered using IPMI. 40 Main Power LED Indicator LED Color Definition Off System Off (power cable not connected) Green System Power On Onboard Power LED Indicator LED Color Definition Green: Blinking BMC Normal Indicator Status Status Definition Off Normal On Overheat Flashing Fan or power fail