Chapter 3 Motherboard Connections Gigabit LAN Ports Enable/Disable Jumpers JPL1 and JPL2 are used to enable or disable LAN ports 1 and 2, respectively. Use JPL3 to enable or disable LAN ports 3, 4, 5, and 6. The default setting is enabled. 10G LAN Ports Enable/Disable JPTG1 is used to enable or disable the 10 Gigabit Ethernet ports. 3.5 LED Indicators LAN LEDs The Ethernet ports (two 1GbE and/or two 10GbE) have two LEDs. On each port, one LED indicates activity when flashing while the other LED may be green, amber or off to indicate the speed of the connection. IPMI-Dedicated LAN LEDs A dedicated IPMI LAN is also included on the motherboard.
The amber LED on the right of the IPMI LAN port indicates activity, while the green LED on the left indicates the speed of the connection. See the table below for more information. IPMI LAN Activity LED Link LED 39 GbE LAN Enable Jumper Settings Pin# Definition 1-2 Enabled (Default) 2-3 Disabled 10Gb Enable/Disable Jumper Settings Pin# Definition 1-2 Enabled (Default) 2-3 Disabled 1GbE LAN LEDs (Connection Speed Indicator) LED Color Definition Off No connection or 10 Mb/s Green 100 Mb/s Amber 1 Gb/s 10GbE LAN LEDs (Connection Speed Indicator) LED Color Definition Off No connection or 10 Mb/s Green 10 Gb/s Amber 1 Gb/s IPMI LAN LEDs Color Status Definition Off Off No Connection Green:
Solid Link/Speed (Left) 100 Mb/s Amber Blinking Activity (Right) Active