Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual USB Wake-Up Use the JPUSB1 jumper to enable the function of "System Waking-Up via USB devices" for USB0/1. This jumper allows you to "wake-up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system. The JPUSB1 jumper is used together with the USB Wake-Up function in the BIOS. Enable both the jumper and the BIOS setting to enable this function. Management Engine (ME) Recovery Use JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for essential system operation only in order to maintain normal power operation and management.

In the single operation mode, online upgrade will be available via Recovery mode. Manufacturing Mode Select Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing Mode, which will allow you to flash the system firmware from a host server to modify system settings. BIOS Recovery Close pins 2 and 3 of jumper JBR1 for BIOS recovery. The default setting is on pins 1 and 2 for normal operation.

38 USB Wake-up Jumper Settings Pin# Definition 1-2 Enabled (Default) 2-3 Disabled ME Recovery Jumper Settings Pin# Definition 1-2 Normal (Default) 2-3 ME Recovery Manufacturing Mode Jumper Settings Jumper Setting Definition Pins 1-2 Normal (Default) Pins 2-3 Manufacturing Mode BIOS Recovery Jumper Settings Pin# Definition 1-2 Normal 2-3 BIOS Recovery