Supermicro 5029P-E1CTR12L — Supermicro SuperStorage 5029P-E1CTR12L User's Manual PDF Download

Chapter 3: Maintenance and Component Installation 4 2 1 3 2 1 Figure 3-1. Removing the Chassis Cover 3.3 Motherboard Components Processor and Heatsink Installation Follow the procedures in this section to install a processor (CPU) and heatsink onto the motherboard. Improper CPU installation or socket misalignment can cause serious damage to the CPU or motherboard which may require RMA repairs. Notes: All power should be off, as described in Section 3.1, before installing the processors. When handling the processor package, avoid placing direct pressure on the label area of the CPU or socket.

The processor and heatsink should be assembled together first to form the Processor Heatsink Module (PHM), and then install the entire PHM into the CPU socket. When receiving a motherboard without a processor pre-installed, make sure that the plastic CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your retailer immediately. Refer to the Supermicro website for updates on CPU support. 25