SuperStorageSystem 5029P-E1CTR12L User's Manual Installing Memory Memory Support The X11SPH-NCTF supports up to 256GB of RDIMM, 512GB of LRDIMM, or 1TB of 3DS LRDMIMM DDR4 (288-pin) ECC memory with speeds of up to 2666MHz in eight memory slots. Refer to the table below for additional memory information. Notes: The blue slots must be populated first. Only populate DIMMA2 and DIMMD2 if the extra memory support is needed. Always use DDR4 DIMM modules of the same type, size and speed. Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM. The motherboard will support odd-numbered modules (1 or 3 modules installed).
However, to achieve the best memory performance, a balanced memory population is recommended. 32 Type Ranks Per DIMM and Data Width DIMM Capacity (GB) Speed (MT/s); Voltage (V); Slot Per Channel (SPC) and DIMM Per Channel (DPC) 1 Slot Per Channel 2 Slots Per Channel DRAM Density 1DPC 1DPC 2DPC 4Gb 8Gb 1.2V 1.2V 1.2V RDIMM SRx4 8GB 16GB 2666 2666 2666 RDIMM SRx8 4GB 8GB RDIMM DRx8 8GB 16GB RDIMM DRx4 16GB 32GB RDIMM 3DS QRx4 N/A 2H-64GB 8Rx4 N/A 4H-128GB LRDIMM QRx4 32GB 64GB LRDIMM 3DS QRx4 N/A 2H-64GB 8Rx4 N/A 4H-128GB