Chapter 3: Maintenance and Component Installation DIMM Installation 1. Insert DIMM modules in the following order: DIMMA1, DIMMD1, DIMMB1, DIMME1, DIMMC1, DIMMF1, DIMMA2, DIMMD2. For the system to work properly, please use memory modules of the same type and speed on the motherboard. 2. Push the release tabs outwards on both ends of the DIMM slot to unlock it. 3. Align the key of the DIMM module with the receptive point on the memory slot. 4. Align the notches on both ends of the module against the receptive points on the ends of the slot. 5. Use two thumbs together to press the notches on both ends of the module straight down into the slot until the module snaps into place. 6.
Press the release tabs to the lock positions to secure the DIMM module into the slot. DIMM Removal Reverse the steps above to remove the DIMM modules from the motherboard. Press both notches straight down into the memory slot. Notches Release Tabs Figure 3-2. Installing DIMMs Note: Visit the product page on the Supermicro website for possible updates to memory support ( www.supermicro.com ). 33