Chapter 4: Motherboard Connections Intel RAID Key Header The JRK1 header allows the user to enable RAID functions. Refer to the table below for pin definitions. Control Panel JF1 contains header pins for various control panel connections. See the figure below for the pin locations and definitions of the control panel buttons and LED indicators. All JF1 wires have been bundled into a single cable to simplify this connection. Make sure the red wire plugs into pin 1 as marked on the motherboard. The other end connects to the control panel PCB board.
20 19 Ground NMI X X PWR LED 3.3V HDD LED 3.3V Stby NIC1 Active LED 3.3V Stby NIC2 Active LED UID LED 3.3V Stby OH/Fan Fail LED Power Fail LED 3.3V Ground Reset Reset Button Ground PWR Power Button 1 2 Figure 4-1. JF1: Control Panel Pins 45 Overheat LED Pin Definitions Pin# Defintion 1 GND 2 PU 3.3V Stdby 3 GND 4 PCH RAID KEY