Supermicro 5029P-E1CTR12L — Supermicro SuperStorage 5029P-E1CTR12L User's Manual PDF Download

SuperStorageSystem 5029P-E1CTR12L User's Manual Reset Button The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset switch on the computer case to reset the system. Refer to the table below for pin definitions. Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for pin definitions.

Overheat (OH)/Fan Fail Connect an LED cable to pins 7 and 8 of the Front Control Panel to use the Overheat/Fan Fail LED connections. The LED on pin 8 provides warnings of overheat or fan failure. Refer to the tables below for pin definitions. Power Fail LED The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below for pin definitions.

46 Reset Button Pin Definitions (JF1) Pins Definition 3 Reset 4 Ground Power Button Pin Definitions (JF1) Pins Definition 1 Signal 2 Ground OH/Fan Fail Indicator Status State Definition Off Normal On Overheat Flashing Fan Fail OH/Fan Fail LED Pin Definitions (JF1) Pin# Definition 7 Blue LED 8 OH/Fan Fail LED Power Fail LED Pin Definitions (JF1) Pin# Definition 5 3.3V 6 PWR Supply Fail