S uper W orkstation 7045A-WT User's Manual 5-9 Connector Defi nitions Main ATX Power Supply Connector The primary power supply connector (JPW1) meets the SSI (Superset ATX) 24-pin specifi cation. Refer to the table on the right for the pin defi nitions of the ATX 24-pin power connector. You must also connect the 4-pin (JPW2/ JPW4) secondary power connectors to your power supply (see below). Secondary Power Connectors Required Connection JPW2 must also be connected to the power supply. Connect JPW4 to provide additional power for add-on cards installed on the PCI-E slots when needed. See the table on the right for pin defi nitions.
Processor Power Connector In addition to the Main ATX power connector (above), the 12V 8-pin processor power connector at JPW3 must also be connected to your power supply. See the table on the right for Required Connection pin defi nitions.
5-14 ATX Power 24-pin Connector Pin Defi nitions (JPW1) Pin# Defi nition Pin # Defi nition 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 COM 3 COM 16 PS ON _ 4 +5V 17 COM 5 COM 18 COM 6 +5V 19 COM 7 COM 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 COM 12 +3.3V +12V 4-pin Power Pin Defi nitions (JPW2) Pins Defi nition 1 - 2 Ground 3 - 4 +12V +12V 4-pin Power Pin Defi nitions (JPW4) Pins Defi nition 1 +12V 2 and 3 GND 4 +5V +12V 8-pin Power Pin Defi nitions (JPW3) Pins Defi nition 1 - 4 Ground 5 - 8 +12V