Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

Chapter 5: Advanced Serverboard Setup PW_ON Connector The PW_ON connector is on pins 1 and 2 of JF1. This header should be connected to the chassis power but- ton. See the table on the right for pin defi nitions. Reset Connector The reset connector is located on pins 3 and 4 of JF1 and attaches to the reset switch on the computer chas- sis. See the table on the right for pin defi nitions. Power Fail LED The Power Fail LED connection is located on pins 5 and 6 of JF1. Re- fer to the table on the right for pin defi nitions. Overheat/Fan Fail LED (OH) Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide ad- vanced warning of chassis overheat- ing.

Refer to the table on the right for pin defi nitions. NIC2 (JLAN2) LED The LED connections for JLAN2 are on pins 9 and 10 of JF1. Attach an LED cable to display network activ- ity. See the table on the right for pin defi nitions. NIC1 (JLAN1) LED The LED connections for JLAN1 are on pins 11 and 12 of JF1. Attach an LED cable to display network activ- ity. See the table on the right for pin defi nitions.

5-15 Power Button Pin Defi nitions (JF1) Pin# Defi nition 1 PW ON _ 2 Ground Reset Button Pin Defi nitions (JF1) Pin# Defi nition 3 Reset 4 Ground PWR Fail LED Pin Defi nitions (JF1) Pin# Defi nition 5 Vcc 6 Ground OH/Fan Fail LED Pin Defi nitions (JF1) Pin# Defi nition 7 Vcc 8 Ground OH/Fan Fail Indicator Status State Defi nition Off Normal On Overheat Flash- ing Fan Fail NIC2 LED Pin Defi nitions (JF1) Pin# Defi nition 9 Vcc 10 Ground NIC1 LED Pin Defi nitions (JF1) Pin# Defi nition 11 Vcc 12 Ground