Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

S uper W orkstation 7045A-WT User's Manual HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. This LED is used to display all IDE and SATA activity. See the table on the right for pin defi nitions. Power On LED The Power On LED connector is lo- cated on pins 15 and 16 of JF1 (use JLED for a 3-pin connector). This connection is used to provide LED indication of power being supplied to the system. See the table on the right for pin defi nitions. NMI Button The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin defi nitions. Fan Headers There are eight fan headers on the serverboard, all of which are 4-pin fans.

(Pins 1-3 of the fan headers are backward compatible with the traditional 3-pin fans.) See the table on the right for pin defi nitions. The onboard fan speeds are controlled by Thermal Management (via Hard- ware Monitoring) under the Advanced Section in the BIOS. The default is disabled. When using Thermal Man- agement setting, please use all 3-pin fans or all 4-pin fans. Note: Fan 7 is for the CPU1 and Fan8 is for the CPU2 heat sink.

5-16 HDD LED Pin Defi nitions (JF1) Pin# Defi nition 13 Vcc 14 HD Active Power LED Pin Defi nitions (JF1) Pin# Defi nition 15 3.3V 16 Control NMI Button Pin Defi nitions (JF1) Pin# Defi nition 19 Control 20 Ground Fan Header Pin Defi nitions (FAN1-8) Pin# Defi nition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control