Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

S uper W orkstation 7045A-WT User's Manual I 2 C Bus to PCI-Exp. Slots Jumpers JI 2 C3 and JI 2 C4 allow you to connect the System Management Bus (I 2 C) to the PCI-E slots. The default set- ting is Disabled. Both jumpers must be set to the same setting See the table on the right for jumper settings. TPM Jumper JPT1 allows you to enable TPM (Trusted Platform Module) if a proces- sors that supports TPM is used in the system. The default setting is Enabled. See the table on the right for jumper set- tings. Note: You must enable TPM Sup- port in the BIOS to use this feature.

5-24 I2C to PCI-E Slots Jumper Settings (JI2C3/JI2C4) Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled TPM Enable/Disable Jumper Settings (JPT1) Pin# Defi nition 1-2 Enabled 2-3 Disabled