Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

S UPER W ORKSTATION 7048GR-TR User's Manual Connect each of the following cables, as required, by your serverboard manufacturer. In some instances, some cables may not need to be connected. Some cables may not be available with your model. Power Supply Connections 6-20 Power Supply Cables Name Qty Connects to: Description 20-pin or 24-pin power cable 1 Serverboard 20-pin or 24-pin power cable provides electricity to the serverboard. and has twenty to twenty-four yellow, black, gray, red, orange, green and blue wires. HDD (Hard Drive) power cable 2 Backplane Each cable has three connectors (two Hard Drive [HDD] and one Floppy Drive [FDD]). Attach the HDD connectors to the backplane.

If you are using a Supermicro backplane, the FDD connector does not need to be attached. 8-pin serverboard cable 1 Serverboard Provides power to the serverboard CPU. This cable has two black and two yellow wires. 4-pin serverboard cable 1 Serverboard Provides power to PCI expansion card. This cable has two black and two yellow wires. 5-pin SMBus power cable (small) 1 Serverboard Allows the SM (System Management) bus to monitor power supply 2-pin INT cable 1 Serverboard Intrusion detection cable allows the system to log when the workstation chassis has been opened.