Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

S UPER W ORKSTATION 7048GR-TR User's Manual Other Connectors Serial Ports Two COM connections (COM1 & COM2) are located on the serverboard. COM1 is located on the rear I/O panel. COM2, located close to PCI-E CPU1 Slot1, provides front access support. See the table on the right for pin definitions. NC = No Connection Universal Serial Bus (USB) Two USB 3.0 ports (USB 4/5) and two USB 2.0 ports (USB 0/1) are located on the I/O back panel. In addition, two internal USB headers provide two USB 3.0 connections (USB 7/8) and two USB 2.0 connections (USB 2/3) for front panel support. A Type A USB 3.0 connector (USB 6) are also located on the motherboard for front access. (Cables are not included).

See the tables on the right and below for pin definitions. Ethernet Ports Two Ethernet ports (LAN1, LAN2) are located on the I/O back panel. These Ethernet ports support Gigabit LAN connections. In addition, an IPMI_Dedicated LAN is located above USB ports 4/5 on the backplane. All Ethernet ports accept RJ45 type cables. Video Connection A Video (VGA) port is located next to LAN port 2 on the I/O back panel.

5-18 Serial COM Ports Pin Definitions Pin # Definition Pin # Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 N/A Front Panel USB (3.0) 7/8, USB (3.0) 6 Pin Definitions Pin # Definition Pin # Definition 1 +5V 2 +5V 3 USB PN2 _ 4 USB PN3 _ 5 USB PP2 _ 6 USB PP3 _ 7 Ground 8 Ground 9 Key 10 Ground Front Panel USB (2.0) 2/3 Pin Definitions Pin# Definition Pin# Definition 1 +5V 5 +5V 2 USB PN1 _ 6 USB PN0 _ 3 USB PP1 _ 7 USB PP0 _ 4 Ground 8 Ground