S UPER W ORKSTATION 7048GR-TR User's Manual Standby Power Header The +5V Standby Power header is located at JSTBY1 on the motherboard. See the table on the right for pin definitions. (You must also have a card with a Standby Power connector and a cable to use this feature.) Chassis Intrusion A Chassis Intrusion header is located at JL1 on the serverboard. Attach an appropriate cable from the chassis to inform you of a chassis intrusion when the chassis is opened.
Chassis Intrusion Pin Definitions Pin# Definition 1 Intrusion Input 2 Ground SMBus for IPMI A 4-pin external BMC System Management Bus (I 2 C) header for IPMI 2.0 with support of NVMe (Non-Volatile Memory Express) and SGPIO (Serial- Link General Purpose I/O) is located at JIPMB1. Connect an appropriate cable here to use the IPMB I 2 C connection with NVMe and SGPIO support on your system. Power SMB (I 2 C) Connector Power System Management Bus (I 2 C) connector (JPI 2 C1) monitors power supply, fan and system temperatures. See the table on the right for pin definitions.
5-20 Standby PWR Pin Definitions Pin# Definition 1 +5V Standby 2 Ground 3 No Connection IPMB Header Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection PWR SMB Pin Definitions Pin# Definition 1 Clock 2 Data 3 PMBUS Alert _ 4 Ground 5 +3.3V