Chapter 5: Advanced Serverboard Setup 5-10 Onboard Indicators Activity LED Link LED GLAN LEDs There are two GLAN ports on the serverboard. An additional IPMI dedicated LAN port is also located above the USB 0/1 ports on the backpanel. Each Gigabit Ethernet LAN port has two LEDs. The yellow LED indicates activity, while the Link LED may be green, amber or off to indicate the speed of the connection. See the tables at right for more information. Activity LED Link LED Note : IPMI dedicated LAN does not operate at 1 Gbps. IPMI Dedicated LAN LEDs In addition to LAN 1/LAN 2, an IPMI dedicated LAN is located on the I/O Backplane of the motherboard.
The amber LED on the right indicates activity, while the green LED on the left indicates the speed of the connection. See the table on the right for more information. IPMI LAN Onboard Power LED An Onboard Power LED is located at LED2 on the serverboard. When this LED is on, the system is on. Be sure to turn off the system and unplug the power cord before removing or installing components. See the tables at right for more information.
5-25 D D GLAN Activity Indicator LED Settings Color Definition Green flashing Active GLAN Link Indicator LED Settings LED Color Definition Off No Connection or 10 Mbps Green 100 Mbps Amber 1 Gbps Link LED Activity LED IPMI LAN Link LED (Left) & Activity LED (Right) Color/State Definition Link (Left) Green: Solid 100 Mbps Amber: Solid 1 Gbps Activity (Right) Orange: Blinking Active Onboard PWR LED Indicator LED Settings LED Color Definition Off System Off (PWR cable not connected) Green System On Green: Flashing Quickly ACPI State