Appendix-1 Parameter List Appendix * 2nd control is displayed when SET (08) is allocated to one of from C001 to C005. App-12 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value Others b086 Frequency conversion coefficient 0.1 to 99.9 1.0 Yes ⎯ b087 STOP key selection 00: Enabled 01: Disabled 00 No ⎯ b088 Free-run stop selection 00: 0 Hz start 01: Frequency pull-in restart 00 No ⎯ b089 Monitor display selection 01: Output frequency monitor 02: Output current monitor 03: Rotation direction monitor 04: PID feedback value monitor 05: Multi-function input monitor 06: Multi-function output monitor 07:
Frequency conversion monitor 01 Yes ⎯ b091 Stop selection 00: Deceleration → Stop 01: Free-run stop 00 No ⎯ b092 Cooling fan control 00: Always ON 01: ON during RUN 02: Depends on the fin temperature 01 No ⎯ b130 Overvoltage LAD stop function 00: Disabled 01: Enabled 00 No ⎯ b131 Overvoltage LAD stop function level setting 200-V class: 330. to 395. 400-V class: 660. to 790. 380/ 760 Yes V b133 Overvoltage protection function selection during deceleration 00: Disabled 01: Enabled 00 No ⎯ b134 Overvoltage protection level setting during deceleration 200-V class: 330. to 395. 400-V class: 660. to 790. 380/ 760 No V b140 Overcurrent suppression function 00: Disabled 01:
Enabled 01 No ⎯ b150 Automatic carrier reduction 00: Disabled 01: Enabled 00 No ⎯ b151 Ready function selection 00: Disabled 01: Enabled 00 No ⎯