Appendix-1 Parameter List Appendix * 2nd control is displayed when SET (08) is allocated to one of from C001 to C005. App-11 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value Non-stop function at momentary power interruption b050 Selection of non- stop function at momentary power interruption 00: Disabled 01: Enabled (Stop) 02: Enabled (Restart) 00 No b051 Starting voltage of non-stop function at momentary power interruption 0.0 to 1000. 0.0 No V b052 Stop deceleration level of non-stop function at momentary power interruption 0.0 to 1000.
0.0 No V b053 Deceleration time of non-stop function at momentary power interruption 0.01 to 99.99 100.0 to 999.9 1000 to 3000 1.0 No s b054 Deceleration starting width of non-stop function at momentary power interruption 0.0 to 10.0 0.0 No Hz Others b055 Overvoltage protection proportional gain during deceleration 0.2 to 5.0 0.2 Yes ⎯ b056 Overvoltage protection integral time during deceleration 0.0 to 150.0 0.2 Yes s b080 AM adjustment 0. to 255. (Shared with C086 for AM offset adjustment) 100. Yes ⎯ b082 Starting frequency 0.5 to 9.9 1.5 No Hz b083 Carrier frequency 2.0 to 12.0 3.0 No kHz Initialization b084 Initialization selection 00: Clears the trip monitor 01: Initializes data 02:
Clears the trip monitor and initializes data 00 No ⎯ b085 Initialization parameter selection 00 * Do not change. 00 No ⎯