Siemens — 10.2.1 Addressing via AS-Interface

Commissioning 10.2 AS-Interface Procedure The AS-i mounting module is addressed via an addressing socket, e.g. using the AS-Interface addressing unit. The connecting cable is used to connect this unit to the addressing socket. For more detailed information on the AS-Interface and addressing AS-i slaves, please refer to the operating instructions titled "Addressing and Diagnosis Instrument for AS-i Modules" (3RK1703-2WB02-1CA1). Note The module address can be changed as often as required.

SIRIUS 3RA6 Compact Starter System Manual, 02/2008, GWA 4NEB 560 0601-02 DS 02 83 Step Instructions Image 1 If the AS-i mounting module on the compact starter is to be addressed via the addressing socket, remember to switch off the AS-i voltage. This is necessary for reasons of plant safety. 2 Connect the AS-Interface addressing unit to the addressing socket. 3 Set the required address.