beckhoff TC170x — 3.1 Revision control

Installation | Revision control 3 Installation | Installation The TwinCAT 3 Usermode Runtime is available as a workload in the TwinCAT package management workload TC170x | TwinCAT 3 Usermode Runtime or as a package TwinCAT.XAR.UserModeRuntime. System requirements It is recommended to provide at least two cores for the operating system - otherwise communication may be interrupted if the computing time within the Usermode Runtime is heavily used. TwinCAT Package Manager: Installation (TwinCAT 3.1 Build 4026) Detailed instructions on installing products can be found in the chapter Managing TwinCAT software in the TwinCAT 3.1 Build 4026 installation instructions .

Install the following workload to be able to use the product: TC170x | TwinCAT 3 Usermode Runtime Licensing The TwinCAT 3 Usermode Runtime is used in different scenarios, which are licensed differently. In principle, the licenses required for execution, such as TC1200 for the PLC, are also required for the device with TwinCAT 3 Usermode Runtime. This licensing takes place per device, so that mixed operation with real- time and Usermode Runtime is also possible with the same licenses. The usual 7 days trial licenses can also be used in combination with the Usermode Runtime. Engineering (TC1700): No separate licensing requirement arises here.

In combination with the 7 days trial licenses, this generally enables free test execution with the TwinCAT 3 Usermode Runtime as well as with the real-time runtime. External Control (TC1701) : This interface is additionally licensed for the device in the usual way. Irrespective of this, the normal licenses (such as TC1200 PLC) are required for the device. Fast As Possible (TC1702): This interface is additionally licensed for the device in the usual way. Irrespective of this, the normal licenses (such as TC1200 PLC) are required for the device. 3.1 Revision control | Revision control The revision control of the Usermode Runtime is based on the TwinCAT.Standard Workload, e.g. version 4026.42.

This is intended to indicate that the behavior is similar to that of the corresponding TwinCAT.Standard Workload. The version number of the package referenced in the TwinCAT.UsermodeRuntime.XAR workload is different because this package is built and tested independently. TC170x 9 Version: 1.6.1 Technical data Description Operating system Windows 10/11 Target platform PC architecture (x64) Minimum TwinCAT version TwinCAT 3.1.4026 Required TwinCAT license TC1700: no separate license required, only licenses used elsewhere in the project TC1701: License "TC3 UserMode Runtime - ExternalControl" in addition to the licenses used elsewhere in the project TC1702:

License "TC3 UserMode Runtime - FastAsPossible" in addition to the licenses used elsewhere in the project