Configuration | Bode Plot High-Pass Frequency: high-pass frequency [in Hz]. Low-Pass Damping: low-pass damping factor. Low Pass Frequency: low-pass frequency [in Hz]. Result Set In order to obtain the overlapping of two already existing sets, they must be specified in the settings for the Result Set. Upon selecting the field, a list of possible sets is displayed. The resulting characteristic curve is automatically determined from the two sets if the number and positions of the interpolation points match. If one of the two source sets changes, then the Result Set is also re- calculated. Source First SourceSet Name: name of the first source set. Second SourceSet Name:
name of the second source set. 5.1.7 Bode Plot - marker properties | Bode Plot - marker properties All settings for a Bode Marker can be assigned here. The following description refers to the representation in categories (switchable in the Properties toolbar). TE132x 29 Version: 1.3.0