Beckhoff Automation GmbH & Co. KG TE1410 — 3.4 Short introduction: TwinCAT ADS

From version 2.x.xxxx.x | Short introduction: TwinCAT ADS From the MATLAB ® PC, you can connect to an unlimited number of target platforms. No additional runtime licenses are required for using the TE1410 on the target platforms. If you do not have a TE1410 license, you can use the software as a demo version. No 7 days trial license A 7-day trial license with full functionality is not available for this product. Restrictions in the demo version When using the demo version, appropriate warnings are displayed to the user. For ADS in Simulink® [ } 32] : after 30 minutes, the simulation ends with an error message. The simulation must be restarted.

In addition, the number of ADS symbols for reading or writing is limited to 4. For ADS in MATLAB® [ } 29] : after 30 minutes of runtime, the created port object goes into an error state. MATLAB ® must be restarted to resume 30 minutes of testing. There is no limitation regarding the ADS symbols in this case. 3.4 Short introduction: TwinCAT ADS | Short introduction: TwinCAT ADS Basic structure of ADS devices and ADS symbols Automation Device Specification (ADS) is the basis for the Interface for MATLAB ® and Simulink ® . ADS describes a device- and fieldbus-independent interface and enables communication between ADS devices.

The ADS device concept and the identification of an ADS device are explained below. The modular system architecture of TwinCAT allows the individual parts of the software (e.g. TwinCAT PLC, TwinCAT NC …) to be regarded as independent devices: there is a software module for each individual task. The servers in the system are the executing devices that provide certain services. The clients are programs that request the services of the servers. A client initially establishes a connection to the server and requests a service: for example, it requests reading the value of a variable or it requests writing a variable.

The Interface for MATLAB ® and Simulink ® provides an ADS client interface for Simulink ® and MATLAB ® , which enables data exchange (read and write) with TwinCAT runtimes. The TwinCAT runtime, or its ADS devices, thus provide their services as ADS servers and can be used from LabVIEW™. In addition, the interface for MATLAB ® and Simulink ® provides an ADS server for MATLAB ® so that a MATLAB ® environment can provide services to ADS clients. TE1410 27 Version: 1.3.1