HARDWARE . . . 6. Technical specifications of the KUAX 671 HARDWARE 24 V DC, +20 %/-20 %, residual ripple < 5 %, isolation of potential, safe- © Power supply guards against reversing polarity, resistant to shorts. The power drawn Processing time per Pulse: standard type dynamic type approx. 240 is approx. 670 ps the encoders during approx. 1400 rpm Absolute angle encoder 180 pulses/rev., Absolute angle encoder 360 pulses/rev., Absolute angle encoder 1000 pulses/rev., nue 180 pulses/ rev.., Absolute angle encoder 360 pulses/rev., . Max. rotation speed of by the cam controller, including the hand terminal and the encoder is 10.5 ampere.
Total power drawn at the outputs will depend on the number to them. of out- puts and the load applied standard operation: Input voltage 24 V from the rotation encoder, potentially isolated with Inputs approx. 700 rpm 16 or 32 (671.022.XX: 14 or 30) outputs; voltage isolated with optical Outputs approx. 250 rpm optical couplers. couplers. river stage: “open emitter” (the positive lead is switched).of a 24 V,1=0.4 A, retant to shorts; all outputs are switched off in case short circuit at any output. Reset by switching the supply voltage back on. Integrated diodes for inductive power consumers. Absolute angi angle encoder (modified Gray y code) code) with with 24 V supply ipply voltage.
voltage. | Output tput vol voltage . coders wih dead ious Dante time compensation approx. 250 rpm 8 (encoder type with compensation of dead-time compensation: 7) max. 128,000; may be assigned to the various outputs and programs as Rotation encoder PG 671 hand terminal: Data protection 1000 pulses/rev., Absolute angle encoder approx. 120 rpm desired. Ambient temperature: Battery buffering for approx. 6 months. . KUAX 671 controller: a) Battery buffering for approx. . Number of programs: Number of cams: Protective system: | P 4 . 3 , Dimensions : = 0Cto55C De Cam controller Hand terminal Encoder b) Lithium battery approx. 10 years. Exception:
If the cam control unit is installed with the battery facing vertically downwards with its positive pole, the buffering time is reduced to approx. 5 years. 19 | 20 IP 20 Cam controller P40 P65 Hand terminal Installed in front panel : w H D 242 110 69 102 | 190 cf. ch. 7.5. 28,8