HARDWARE HARDWARE 5.2. Illustration of the hand terminal 5.3. Survey of the control keys on the KUAX 671 PG Initialization: This key is used when entering information conceming encoder resolution and the desired zero point for the encoder. INIT Programming key: for generating or modifying programs, this key must be used to enter the access code (a number up to max. 255) for the program [key] ming mode. Program number: The number of the program to be modified or run is centered here. =KUAX 671PG. 2-line, 16 character display Output numbers Display bright Brief explanation ness control | of key functions 1— Touch-pad keyboard copy Output:
This button is used to enter the number of the output which is to be modified. Cam: This button is used to check or modify a certain cam of an output; or, in combination with the CTRL key, a dead-time compensation can be entered. Assign cam: The "on" and "off" points for the cam are entered here. Teach-in: Used to “memorize” the machine position. The positions reported by the rotation encoder are entered as the switching point for on and off. Delete: This key is used to delete programs, outputs or individual cams. Possibility of correcting accidentally entered erroneous values. Copy function:
Makes it possible to copy programs within the cam controller or to copy from one controller to another. Correction: This button is used to stop function. Control key: This key is used to change the program key code. In combination with other keys, special functions, e.g. the display of the * current numerical code, are announced. Plus correction: Used in conjunction with the function buttons, this key makes it possible to optimize the value displayed, in the "forward" direction. Minus correction: Used in conjunction with the function buttons, this key makes it possible to optimize the the displayed, in the "reverse" direction. Enter function:
All the entries are terminated and placed in memory when the ENTER button is depresed. ENTER Language selection: In combination with the Ctrl key, the text shown on the display can be shifted to German, English or French. Using this key, the encoder rotation speed can be shown on the display as well. 17 16