HARDWARE 7.4. Note regarding encoder couplings and gearing We recommend using an elastic coupling to join the encoder shaft with the HARDWARE 7.5. Technical spe ications and pin assignments 7.5.1. Absolute angle encoder with screw-in plug connection drive shaft. This will prevent excess strain on the encoder shaft. Gearboxes (step-up or step-down) may be used to match the shaft speed to the encoder. Anodized aluminum ‘Hardened stainless see! ‘Hardened stainless ste] 10mm 25N 40N ‘Such gearing units may be obtained from: Euchner & Co., KohlhammerstraBe 16 D-7022 Leinfelden-Echterdingen. 1 ‘max. 3000 pm LeNem 67 Ow 55°C 24vDC ‘West Germany Telephone: 0711-759000 Gerwah P.O.
Box 6 D-8751 GroBwallstadt 50mA 22 KOhm West Gemany 200A Telephone: 06022-2101 Pin 1 2 3 4 5S 6 7 8 9 10 13, 14 1s 16 —_—_Pin assignment at 17pole plug: Assignment Jacket color Track black Track? white Track3 yellow Track ‘peen Tracks violet Track6 pink Tack? my Track red Track white/brown Track 10(1000 pulse encoder only) white/green Shield shield conductor Rotation direction change * white/btue GND blue 24VDC brown, * Cf. ch. 4.6. Counting direction of rotation encoder and ch. 4.7. Plug connectors, Dimensions: eld 27