E165GB — Technische Informationen

SOFTWARE SOFTWARE 9.4.10. Displaying the cam data ‘The hand terminal offers the option of displaying the switch-on and switchoff points for the cams which have already been defined. It is also possible to modify the cam specifications when in this mode. The desired output is to 9.4.11. Optimizing the cams The switch-on and switch-off points for each previously determined cam can be optimized step by step by using the "plus" or "minus" keys. The machine may remain in operation while doing so. The optimized switching points are entered into the program after displaying them. be selected before activating this function. Program me Cam number Current output Example for optimizing a cam:

Display ‘An example for displaying cam data: Comments ence Display ‘The machine asks for the number of the cam at the particular ‘output. HF Switch-off point Switch-on point Comments Enter the number for the cam which you wish to optimize. The first cam at this output will appear if you depress the ENTER button immediately instead of ‘one of more numeric keys. ‘The machine asks for the cam ‘number within the particular ‘output. 3 Enter the number for the cam which you wish to have display ed.If the ENTER button is depressed instead of a digit or digits the first cam for that output PO cam001 A17 ISS 245 values. PO Noc002 Al7 wil: be displayed. 290-1.

348 Hl EG [1 i] If there is no cam which corres PO Posnnn If there is no cam which corres ponds to the cam number which you have entered, dots will be shown instead of numerical Al7 41 42 PO Nocnnn 21s Al7 345 PO Nocnnn AI7 291 “L345 PO Nocnnn Al7 291 344 ‘The switch-on point can be optimized step by step. ‘The + or - key is used for optimi zation. ‘Advance to the switch-off point. ‘The + or - key is used for optim zation. The value displayed is entered in the program immediately. PO Nosnnn Al7 291 344 ‘The optimization routine is now finished. Depress "F" to return to the standard display format.