34 en 2. Twist the steam nozzle (6d) anticlock- wise and remove it. 8. Attach the milk frother to the steam valve. Check that the red mark on the steam valve is covered. 1 6d 2 3. Remove the frothing tube (6c). 6c 4. Clean the individual parts with a detergent solution and a soft brush. If necessary, soak in a warm detergent solution. Clean the air hole (6e) thoroughly. 6e Ў Risk of scalding! Only use the appliance when the milk frother (6) is completely assembled and fi tted. Cleaning the brewing unit Clean the brewing unit regularly. To pre-clean the brewing unit automatically: 1. Select e by turning the rotary knob (14). 2. Place an empty glass under outlet (7). 3.
Press the start button (10). The appliance rinses. 5. Rinse all parts with clean water and dry. 6. Fit the steam nozzle (6d) and frothing tube (6c) back into the metal sleeve. 6d 6c 1 2 In addition to the automatic cleaning pro- gramme, the brewing unit (5a) should be removed regularly for cleaning. (See fi gure E at the start of the operating instructions.) 1. Switch the appliance off at the power on/off switch O / I (9). No buttons are lit. 2. Open the door (5b) to the brewing unit. 3. Slide the red lock (5d) on the brewing unit completely to the left. 4. Press the red button (5c), grasp the brewing unit by the recessed grips and remove carefully. 7.
Twist the steam nozzle clockwise until the marks are aligned. Robert Bosch Hausgerдte GmbH TES55236RU.indb 34 04.06.2013 14:35:48